[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PATCH v8 09/14] hw/ppc: Replace fprintf(stderr, "*\n" with e
|
From: |
Markus Armbruster |
|
Subject: |
[Qemu-ppc] [PATCH v8 09/14] hw/ppc: Replace fprintf(stderr, "*\n" with error_report() |
|
Date: |
Sat, 3 Feb 2018 09:43:10 +0100 |
From: Alistair Francis <address@hidden>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}'
\
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines were then manually tweaked to pass checkpatch and some curly
braces were added to match QEMU style.
Signed-off-by: Alistair Francis <address@hidden>
Cc: address@hidden
Conversions that aren't followed by exit() dropped, because they might
be inappropriate.
Also trim trailing punctuation from error messages.
Signed-off-by: Markus Armbruster <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
---
hw/ppc/e500.c | 16 ++++++++--------
hw/ppc/mac_newworld.c | 2 +-
hw/ppc/mac_oldworld.c | 2 +-
hw/ppc/ppc405_boards.c | 15 ++++++---------
hw/ppc/ppc440_bamboo.c | 16 ++++++++--------
hw/ppc/prep.c | 4 ++--
hw/ppc/virtex_ml507.c | 4 ++--
7 files changed, 28 insertions(+), 31 deletions(-)
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index c4fe06ea2a..343bba93ce 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -811,8 +811,8 @@ void ppce500_init(MachineState *machine, PPCE500Params
*params)
cs = CPU(cpu);
if (env->mmu_model != POWERPC_MMU_BOOKE206) {
- fprintf(stderr, "MMU model %i not supported by this machine.\n",
- env->mmu_model);
+ error_report("MMU model %i not supported by this machine",
+ env->mmu_model);
exit(1);
}
@@ -959,8 +959,8 @@ void ppce500_init(MachineState *machine, PPCE500Params
*params)
cur_base,
ram_size - cur_base);
if (kernel_size < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- machine->kernel_filename);
+ error_report("could not load kernel '%s'",
+ machine->kernel_filename);
exit(1);
}
@@ -974,8 +974,8 @@ void ppce500_init(MachineState *machine, PPCE500Params
*params)
ram_size - initrd_base);
if (initrd_size < 0) {
- fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
- machine->initrd_filename);
+ error_report("could not load initial ram disk '%s'",
+ machine->initrd_filename);
exit(1);
}
@@ -1016,7 +1016,7 @@ void ppce500_init(MachineState *machine, PPCE500Params
*params)
kernel_size = load_uimage(filename, &bios_entry, &loadaddr, NULL,
NULL, NULL);
if (kernel_size < 0) {
- fprintf(stderr, "qemu: could not load firmware '%s'\n", filename);
+ error_report("could not load firmware '%s'", filename);
exit(1);
}
}
@@ -1029,7 +1029,7 @@ void ppce500_init(MachineState *machine, PPCE500Params
*params)
initrd_base, initrd_size,
kernel_base, kernel_size);
if (dt_size < 0) {
- fprintf(stderr, "couldn't load device tree\n");
+ error_report("couldn't load device tree");
exit(1);
}
assert(dt_size < DTB_MAX_SIZE);
diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 3fa7c429d5..b832417a56 100644
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -270,7 +270,7 @@ static void ppc_core99_init(MachineState *machine)
}
}
if (ppc_boot_device == '\0') {
- fprintf(stderr, "No valid boot device for Mac99 machine\n");
+ error_report("No valid boot device for Mac99 machine");
exit(1);
}
}
diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 010ea36bf2..d1f4546613 100644
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -218,7 +218,7 @@ static void ppc_heathrow_init(MachineState *machine)
#endif
}
if (ppc_boot_device == '\0') {
- fprintf(stderr, "No valid boot device for G3 Beige machine\n");
+ error_report("No valid boot device for G3 Beige machine");
exit(1);
}
}
diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
index e92db2c66a..fae9c76174 100644
--- a/hw/ppc/ppc405_boards.c
+++ b/hw/ppc/ppc405_boards.c
@@ -324,8 +324,7 @@ static void ref405ep_init(MachineState *machine)
kernel_size = load_image_targphys(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
+ error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
printf("Load kernel size %ld at " TARGET_FMT_lx,
@@ -336,8 +335,8 @@ static void ref405ep_init(MachineState *machine)
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
- fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
- initrd_filename);
+ error_report("could not load initial ram disk '%s'",
+ initrd_filename);
exit(1);
}
} else {
@@ -607,8 +606,7 @@ static void taihu_405ep_init(MachineState *machine)
kernel_size = load_image_targphys(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
+ error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd */
@@ -617,9 +615,8 @@ static void taihu_405ep_init(MachineState *machine)
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
- fprintf(stderr,
- "qemu: could not load initial ram disk '%s'\n",
- initrd_filename);
+ error_report("could not load initial ram disk '%s'",
+ initrd_filename);
exit(1);
}
} else {
diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
index 693c215108..e284062bf2 100644
--- a/hw/ppc/ppc440_bamboo.c
+++ b/hw/ppc/ppc440_bamboo.c
@@ -12,6 +12,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/error-report.h"
#include "qemu-common.h"
#include "net/net.h"
#include "hw/hw.h"
@@ -186,8 +187,8 @@ static void bamboo_init(MachineState *machine)
env = &cpu->env;
if (env->mmu_model != POWERPC_MMU_BOOKE) {
- fprintf(stderr, "MMU model %i not supported by this machine.\n",
- env->mmu_model);
+ error_report("MMU model %i not supported by this machine",
+ env->mmu_model);
exit(1);
}
@@ -220,7 +221,7 @@ static void bamboo_init(MachineState *machine)
NULL);
pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (!pcibus) {
- fprintf(stderr, "couldn't create PCI controller!\n");
+ error_report("couldn't create PCI controller");
exit(1);
}
@@ -261,8 +262,7 @@ static void bamboo_init(MachineState *machine)
}
/* XXX try again as binary */
if (success < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
+ error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
}
@@ -273,8 +273,8 @@ static void bamboo_init(MachineState *machine)
ram_size - RAMDISK_ADDR);
if (initrd_size < 0) {
- fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
- initrd_filename, RAMDISK_ADDR);
+ error_report("could not load ram disk '%s' at %x",
+ initrd_filename, RAMDISK_ADDR);
exit(1);
}
}
@@ -283,7 +283,7 @@ static void bamboo_init(MachineState *machine)
if (kernel_filename) {
if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
initrd_size, kernel_cmdline) < 0) {
- fprintf(stderr, "couldn't load device tree\n");
+ error_report("couldn't load device tree");
exit(1);
}
}
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index af08ac319a..096d4d4cfb 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -574,7 +574,7 @@ static void ppc_prep_init(MachineState *machine)
}
}
if (ppc_boot_device == '\0') {
- fprintf(stderr, "No valid boot device for Mac99 machine\n");
+ error_report("No valid boot device for Mac99 machine");
exit(1);
}
}
@@ -595,7 +595,7 @@ static void ppc_prep_init(MachineState *machine)
qdev_init_nofail(dev);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (pci_bus == NULL) {
- fprintf(stderr, "Couldn't create PCI host controller.\n");
+ error_report("Couldn't create PCI host controller");
exit(1);
}
sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0);
diff --git a/hw/ppc/virtex_ml507.c b/hw/ppc/virtex_ml507.c
index 5ac4f76613..f70a70ce82 100644
--- a/hw/ppc/virtex_ml507.c
+++ b/hw/ppc/virtex_ml507.c
@@ -215,8 +215,8 @@ static void virtex_init(MachineState *machine)
env = &cpu->env;
if (env->mmu_model != POWERPC_MMU_BOOKE) {
- fprintf(stderr, "MMU model %i not supported by this machine.\n",
- env->mmu_model);
+ error_report("MMU model %i not supported by this machine",
+ env->mmu_model);
exit(1);
}
--
2.13.6
- [Qemu-ppc] [PATCH v8 09/14] hw/ppc: Replace fprintf(stderr, "*\n" with error_report(),
Markus Armbruster <=