[Qemu-ppc] [PATCH 2/2] ppc-e500: implement PCI INTx routing

[Bharat Bhushan]

This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to find which pci 
device
maps to which irq. This is used for pci-device passthrough using vfio.

Also without this patch we gets below warning

"
  PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
  qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
"
and Legacy interrupt does not work with pci device passthrough.

Signed-off-by: Bharat Bhushan <address@hidden>
Acked-by: Michael S. Tsirkin <address@hidden>
---
 hw/pci-host/ppce500.c |   20 ++++++++++++++++++--
 1 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/hw/pci-host/ppce500.c b/hw/pci-host/ppce500.c
index 71e5ca9..ffea782 100644
--- a/hw/pci-host/ppce500.c
+++ b/hw/pci-host/ppce500.c
@@ -88,6 +88,7 @@ struct PPCE500PCIState {
     struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
     uint32_t gasket_time;
     qemu_irq irq[PCI_NUM_PINS];
+    uint32_t irq_num[PCI_NUM_PINS];
     uint32_t first_slot;
     /* mmio maps */
     MemoryRegion container;
@@ -267,13 +268,26 @@ static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int 
pin)
 
 static void mpc85xx_pci_set_irq(void *opaque, int pin, int level)
 {
-    qemu_irq *irq = opaque;
+    PPCE500PCIState *s = opaque;
+    qemu_irq *pic = s->irq;
 
     pci_debug("%s: PCI irq %d, level:%d\n", __func__, pin , level);
 
     qemu_set_irq(irq[pin], level);
 }
 
+static PCIINTxRoute e500_route_intx_pin_to_irq(void *opaque, int pin)
+{
+    PCIINTxRoute route;
+    PPCE500PCIState *s = opaque;
+
+    route.mode = PCI_INTX_ENABLED;
+    route.irq = s->irq_num[pin];
+
+    pci_debug("%s: PCI irq-pin = %d, irq_num= %d\n", __func__, pin, route.irq);
+    return route;
+}
+
 static const VMStateDescription vmstate_pci_outbound = {
     .name = "pci_outbound",
     .version_id = 0,
@@ -350,12 +364,13 @@ static int e500_pcihost_initfn(SysBusDevice *dev)
 
     for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
         sysbus_init_irq(dev, &s->irq[i]);
+        s->irq_num[i] = i + 1;
     }
 
     memory_region_init(&s->pio, OBJECT(s), "pci-pio", PCIE500_PCI_IOLEN);
 
     b = pci_register_bus(DEVICE(dev), NULL, mpc85xx_pci_set_irq,
-                         mpc85xx_pci_map_irq, s->irq, address_space_mem,
+                         mpc85xx_pci_map_irq, s, address_space_mem,
                          &s->pio, PCI_DEVFN(s->first_slot, 0), 4, 
TYPE_PCI_BUS);
     h->bus = b;
 
@@ -373,6 +388,7 @@ static int e500_pcihost_initfn(SysBusDevice *dev)
     memory_region_add_subregion(&s->container, PCIE500_REG_BASE, &s->iomem);
     sysbus_init_mmio(dev, &s->container);
     sysbus_init_mmio(dev, &s->pio);
+    pci_bus_set_route_irq_fn(b, e500_route_intx_pin_to_irq);
 
     return 0;
 }
-- 
1.7.0.4