[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r11003 - in gnuradio/branches/releases/3.2: . gnuradio
|
From: |
jcorgan |
|
Subject: |
[Commit-gnuradio] r11003 - in gnuradio/branches/releases/3.2: . gnuradio-core/src/python/gnuradio/gr gr-qtgui/src/python gr-wxgui/src/python/plotter grc/data/platforms/python/blocks usrp2/firmware/apps usrp2/firmware/lib |
|
Date: |
Tue, 12 May 2009 07:39:30 -0600 (MDT) |
Author: jcorgan
Date: 2009-05-12 07:39:29 -0600 (Tue, 12 May 2009)
New Revision: 11003
Added:
gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev30.c
gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev31.c
gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev40.c
Modified:
gnuradio/branches/releases/3.2/
gnuradio/branches/releases/3.2/gnuradio-core/src/python/gnuradio/gr/pubsub.py
gnuradio/branches/releases/3.2/gr-qtgui/src/python/usrp_display.py
gnuradio/branches/releases/3.2/gr-wxgui/src/python/plotter/grid_plotter_base.py
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_add_xx.xml
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_channel_model.xml
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_multiply_xx.xml
gnuradio/branches/releases/3.2/usrp2/firmware/apps/
gnuradio/branches/releases/3.2/usrp2/firmware/apps/Makefile.am
gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_init.c
gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_rfx.c
Log:
Applied changesets r10925, r10997:10999 to release 3.2 branch.
Property changes on: gnuradio/branches/releases/3.2
___________________________________________________________________
Modified: svn:mergeinfo
- /gnuradio/branches/developers/eb/t348:10638-10648
/gnuradio/branches/developers/eb/t378:10683-10688
/gnuradio/branches/developers/jblum/gui_guts:10464-10658
/gnuradio/branches/developers/jblum/vlen:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier:10818-10858
/gnuradio/branches/developers/jcorgan/fw-optimize:10428-10429
/gnuradio/branches/developers/jcorgan/gpio2:10713-10765
/gnuradio/branches/developers/jcorgan/t161:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4:10555-10595
/gnuradio/branches/developers/michaelld/two_mods:10540-10546
/gnuradio/trunk:10356-10359,10481-10482,10497-10499,10506-10507,10511,10514,10521,10523-10524,10529,10531,10535,10537-10538,10550-10551,10556,10558-10560,10562-10563,10565,10574-10576,10578-10579,10581-10582,10585,10587,10596-10600,10623-10624,10629,10632-10634,10645-10646,10649-10650,10653-10655,10660-10661,10671,10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+ /gnuradio/branches/developers/eb/t348:10638-10648
/gnuradio/branches/developers/eb/t378:10683-10688
/gnuradio/branches/developers/jblum/gui_guts:10464-10658
/gnuradio/branches/developers/jblum/vlen:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier:10818-10858
/gnuradio/branches/developers/jcorgan/fw-optimize:10428-10429
/gnuradio/branches/developers/jcorgan/gpio2:10713-10765
/gnuradio/branches/developers/jcorgan/t161:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4:10555-10595
/gnuradio/branches/developers/michaelld/two_mods:10540-10546
/gnuradio/trunk:10356-10359,10481-10482,10497-10499,10506-10507,10511,10514,10521,10523-10524,10529,10531,10535,10537-10538,10550-10551,10556,10558-10560,10562-10563,10565,10574-10576,10578-10579,10581-10582,10585,10587,10596-10600,10623-10624,10629,10632-10634,10645-10646,10649-10650,10653-10655,10660-10661,10671,10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/gnuradio-core/src/python/gnuradio/gr/pubsub.py
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/eb/t348/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10638-10648
/gnuradio/branches/developers/eb/t378/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10683-10688
/gnuradio/branches/developers/jblum/vlen/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10713-10765
/gnuradio/branches/developers/jcorgan/t161/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10876-10880
/gnuradio/trunk/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10653-10655,10660-10661,10671,10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/eb/t348/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10638-10648
/gnuradio/branches/developers/eb/t378/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10683-10688
/gnuradio/branches/developers/jblum/vlen/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10713-10765
/gnuradio/branches/developers/jcorgan/t161/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10876-10880
/gnuradio/trunk/gnuradio-core/src/python/gnuradio/gr/pubsub.py:10653-10655,10660-10661,10671,10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/gr-qtgui/src/python/usrp_display.py
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/jcorgan/cpphier/gr-qtgui/src/python/usrp_display.py:10818-10858
/gnuradio/branches/developers/jcorgan/t161/gr-qtgui/src/python/usrp_display.py:10876-10880
/gnuradio/trunk/gr-qtgui/src/python/usrp_display.py:10826,10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/jcorgan/cpphier/gr-qtgui/src/python/usrp_display.py:10818-10858
/gnuradio/branches/developers/jcorgan/t161/gr-qtgui/src/python/usrp_display.py:10876-10880
/gnuradio/trunk/gr-qtgui/src/python/usrp_display.py:10826,10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/gr-wxgui/src/python/plotter/grid_plotter_base.py
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/eb/t378/gr-wxgui/src/python/plotter/grid_plotter_base.py:10683-10688
/gnuradio/branches/developers/jblum/vlen/gr-wxgui/src/python/plotter/grid_plotter_base.py:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/gr-wxgui/src/python/plotter/grid_plotter_base.py:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/gr-wxgui/src/python/plotter/grid_plotter_base.py:10713-10765
/gnuradio/branches/developers/jcorgan/t161/gr-wxgui/src/python/plotter/grid_plotter_base.py:10876-10880
/gnuradio/trunk/gr-wxgui/src/python/plotter/grid_plotter_base.py:10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/eb/t378/gr-wxgui/src/python/plotter/grid_plotter_base.py:10683-10688
/gnuradio/branches/developers/jblum/vlen/gr-wxgui/src/python/plotter/grid_plotter_base.py:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/gr-wxgui/src/python/plotter/grid_plotter_base.py:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/gr-wxgui/src/python/plotter/grid_plotter_base.py:10713-10765
/gnuradio/branches/developers/jcorgan/t161/gr-wxgui/src/python/plotter/grid_plotter_base.py:10876-10880
/gnuradio/trunk/gr-wxgui/src/python/plotter/grid_plotter_base.py:10673,10678,10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_add_xx.xml
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/gr_add_vxx.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/gr_add_xx.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/gr_add_vxx.xml:10464-10658
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/gr_add_xx.xml:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/gr_add_xx.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_add_xx.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/gr_add_vxx.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/gr_add_vxx.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_add_xx.xml:10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/gr_add_vxx.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/gr_add_xx.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/gr_add_vxx.xml:10464-10658
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/gr_add_xx.xml:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/gr_add_xx.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_add_xx.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/gr_add_vxx.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/gr_add_vxx.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_add_xx.xml:10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_channel_model.xml
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/blks2_channel_model.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/blks2_channel_model.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/blks2_channel_model.xml:10464-10658
/gnuradio/branches/developers/jblum/vlen/grc/data/platforms/python/blocks/blks2_channel_model.xml:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/blks2_channel_model.xml:10818-10858
/gnuradio/branches/developers/jcorgan/fw-optimize/grc/data/platforms/python/blocks/blks2_channel_model.xml:10428-10429
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/blks2_channel_model.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_channel_model.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/blks2_channel_model.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/blks2_channel_model.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_channel_model.xml:10826,10853,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/blks2_channel_model.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/blks2_channel_model.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/blks2_channel_model.xml:10464-10658
/gnuradio/branches/developers/jblum/vlen/grc/data/platforms/python/blocks/blks2_channel_model.xml:10667-10677
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/blks2_channel_model.xml:10818-10858
/gnuradio/branches/developers/jcorgan/fw-optimize/grc/data/platforms/python/blocks/blks2_channel_model.xml:10428-10429
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/blks2_channel_model.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_channel_model.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/blks2_channel_model.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/blks2_channel_model.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_channel_model.xml:10826,10853,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on:
gnuradio/branches/releases/3.2/grc/data/platforms/python/blocks/gr_multiply_xx.xml
___________________________________________________________________
Modified: svn:mergeinfo
-
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10464-10658
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923
+
/gnuradio/branches/developers/eb/t348/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10638-10648
/gnuradio/branches/developers/eb/t378/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10683-10688
/gnuradio/branches/developers/jblum/gui_guts/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10464-10658
/gnuradio/branches/developers/jcorgan/cpphier/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10818-10858
/gnuradio/branches/developers/jcorgan/gpio2/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10713-10765
/gnuradio/branches/developers/jcorgan/t161/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10876-10880
/gnuradio/branches/developers/michaelld/am_swig_4/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10555-10595
/gnuradio/branches/developers/michaelld/two_mods/grc/data/platforms/python/blocks/gr_multiply_vxx.xml:10540-10546
/gnuradio/trunk/grc/data/platforms/python/blocks/gr_multiply_xx.xml:10681,10686,10689,10691,10701-10702,10707-10710,10714-10721,10725,10728-10736,10739-10751,10759-10762,10766,10768-10769,10778-10779,10787-10789,10793,10826,10847-10848,10850,10852-10853,10859,10861-10862,10864-10865,10869,10871-10872,10877-10878,10881,10884,10890,10907-10908,10919-10923,10925,10998-10999
Property changes on: gnuradio/branches/releases/3.2/usrp2/firmware/apps
___________________________________________________________________
Modified: svn:ignore
- *-stamp
*.a
*.bin
*.dump
*.log
*.rom
*.map
.deps
Makefile
Makefile.in
aclocal.m4
autom4te.cache
blink_leds
blink_leds2
build
compile
config.h
config.h.in
config.log
config.status
configure
depcomp
echo
eth_test
gen_eth_packets
ibs_rx_test
ibs_tx_test
install-sh
libtool
ltmain.sh
missing
py-compile
rcv_eth_packets
run_tests.sh
stamp-h1
test1
test_phy_comm
timer_test
buf_ram_test
buf_ram_zero
hello
test_printf
test_spi
test_i2c
gen_pause_frames
test_serdes
rx_only
tx_only
tx_standalone
tx_drop
tx_drop2
tx_drop_rate_limited
test_lsdac
test_lsadc
read_dbids
test_db_spi
ramp_lsdac
eth_to_serdes
serdes_to_dsp
sd_gentest
sd_bounce
can_i_sub
tx_only_v2
rx_only_v2
txrx
eth_serdes
serdes_txrx
set_hw_rev
test_sd
factory_test
test_ram
mimo_tx
mimo_tx_slave
burn_dbsrx_eeprom
+ *-stamp
*.a
*.bin
*.dump
*.log
*.rom
*.map
.deps
Makefile
Makefile.in
aclocal.m4
autom4te.cache
blink_leds
blink_leds2
build
compile
config.h
config.h.in
config.log
config.status
configure
depcomp
echo
eth_test
gen_eth_packets
ibs_rx_test
ibs_tx_test
install-sh
libtool
ltmain.sh
missing
py-compile
rcv_eth_packets
run_tests.sh
stamp-h1
test1
test_phy_comm
timer_test
buf_ram_test
buf_ram_zero
hello
test_printf
test_spi
test_i2c
gen_pause_frames
test_serdes
rx_only
tx_only
tx_standalone
tx_drop
tx_drop2
tx_drop_rate_limited
test_lsdac
test_lsadc
read_dbids
test_db_spi
ramp_lsdac
eth_to_serdes
serdes_to_dsp
sd_gentest
sd_bounce
can_i_sub
tx_only_v2
rx_only_v2
txrx
eth_serdes
serdes_txrx
set_hw_rev
test_sd
factory_test
test_ram
mimo_tx
mimo_tx_slave
burn_dbsrx_eeprom
burnrev30
burnrev31
burnrev40
Modified: gnuradio/branches/releases/3.2/usrp2/firmware/apps/Makefile.am
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/apps/Makefile.am
2009-05-12 13:35:42 UTC (rev 11002)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/apps/Makefile.am
2009-05-12 13:39:29 UTC (rev 11003)
@@ -46,6 +46,9 @@
tx_standalone \
txrx \
factory_test \
+ burnrev30 \
+ burnrev31 \
+ burnrev40 \
serdes_txrx \
sd_gentest \
sd_bounce \
Copied: gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev30.c (from
rev 10999, gnuradio/trunk/usrp2/firmware/apps/burnrev30.c)
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev30.c
(rev 0)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev30.c
2009-05-12 13:39:29 UTC (rev 11003)
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2007,2008 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include "bool.h"
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_common_v2.h"
+#include "memcpy_wa.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <i2c.h>
+#include <usrp2_i2c_addr.h>
+#include <clocks.h>
+#include "sd.h"
+
+#define HW_REV_MAJOR 3
+#define HW_REV_MINOR 0
+
+#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now)
+
+#if (FW_SETS_SEQNO)
+static int fw_seqno; // used when f/w is filling in sequence numbers
+#endif
+
+
+/*
+ * Full duplex Tx and Rx between ethernet and DSP pipelines
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow
+ * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow
+ */
+//#define CPU_RX_BUF 0 // eth -> cpu
+
+#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer)
+#define DSP_RX_BUF_1 3 // dsp rx -> eth
+#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer)
+#define DSP_TX_BUF_1 5 // eth -> dsp tx
+
+/*
+ * ================================================================
+ * configure DSP TX double buffering state machine (eth -> dsp)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp)
+// DSP Tx reads word0 (flags) + timestamp followed by samples
+
+#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4)
+
+// Receive from ethernet
+buf_cmd_args_t dsp_tx_recv_args = {
+ PORT_ETH,
+ 0,
+ BP_LAST_LINE
+};
+
+// send to DSP Tx
+buf_cmd_args_t dsp_tx_send_args = {
+ PORT_DSP,
+ DSP_TX_FIRST_LINE, // starts just past transport header
+ 0 // filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm; // the state machine
+
+/*
+ * ================================================================
+ * configure DSP RX double buffering state machine (dsp -> eth)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0)
+// DSP Rx writes timestamp followed by nlines_per_frame of samples
+#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4 + 1)
+
+// receive from DSP
+buf_cmd_args_t dsp_rx_recv_args = {
+ PORT_DSP,
+ DSP_RX_FIRST_LINE,
+ BP_LAST_LINE
+};
+
+// send to ETH
+buf_cmd_args_t dsp_rx_send_args = {
+ PORT_ETH,
+ 0, // starts with ethernet header in line 0
+ 0, // filled in from list_line register
+};
+
+dbsm_t dsp_rx_sm; // the state machine
+
+
+// The mac address of the host we're sending to.
+u2_mac_addr_t host_mac_addr;
+
+
+// variables for streaming mode
+
+static bool streaming_p = false;
+static unsigned int streaming_items_per_frame = 0;
+static int streaming_frame_count = 0;
+#define FRAMES_PER_CMD 1000
+
+bool is_streaming(void){ return streaming_p; }
+
+// ----------------------------------------------------------------
+
+
+void
+restart_streaming(void)
+{
+ // setup RX DSP regs
+ dsp_rx_regs->clear_state = 1; // reset
+
+ streaming_p = true;
+ streaming_frame_count = FRAMES_PER_CMD;
+
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1); // set "chain" bit
+
+ // kick off the state machine
+ dbsm_start(&dsp_rx_sm);
+
+ dsp_rx_regs->rx_time = 0; // enqueue first of two commands
+
+ // make sure this one and the rest have the "now" and "chain" bits set.
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1);
+
+ dsp_rx_regs->rx_time = 0; // enqueue second command
+}
+
+void
+start_rx_streaming_cmd(const u2_mac_addr_t *host, op_start_rx_streaming_t *p)
+{
+ host_mac_addr = *host; // remember who we're sending to
+
+ /*
+ * Construct ethernet header and word0 and preload into two buffers
+ */
+ u2_eth_packet_t pkt;
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.ehdr.dst = *host;
+ pkt.ehdr.ethertype = U2_ETHERTYPE;
+ u2p_set_word0(&pkt.fixed, 0, 0);
+ // DSP RX will fill in timestamp
+
+ memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt));
+ memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt));
+
+
+ if (FW_SETS_SEQNO)
+ fw_seqno = 0;
+
+ streaming_items_per_frame = p->items_per_frame;
+ restart_streaming();
+}
+
+
+void
+stop_rx_cmd(void)
+{
+ streaming_p = false;
+ dsp_rx_regs->clear_state = 1; // flush cmd queue
+ bp_clear_buf(DSP_RX_BUF_0);
+ bp_clear_buf(DSP_RX_BUF_1);
+}
+
+
+static void
+setup_tx()
+{
+ dsp_tx_regs->clear_state = 1;
+ bp_clear_buf(DSP_TX_BUF_0);
+ bp_clear_buf(DSP_TX_BUF_1);
+
+ int tx_scale = 256;
+ int interp = 32;
+
+ // setup some defaults
+
+ dsp_tx_regs->freq = 0;
+ dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale;
+ dsp_tx_regs->interp_rate = interp;
+}
+
+
+#if (FW_SETS_SEQNO)
+/*
+ * Debugging ONLY. This will be handled by the tx_protocol_engine.
+ *
+ * This is called when the DSP Rx chain has filled in a packet.
+ * We set and increment the seqno, then return false, indicating
+ * that we didn't handle the packet. A bit of a kludge
+ * but it should work.
+ */
+bool
+fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false
+{
+ uint32_t *p = buffer_ram(buf_this);
+ uint32_t seqno = fw_seqno++;
+
+ // KLUDGE all kinds of nasty magic numbers and embedded knowledge
+ uint32_t t = p[4];
+ t = (t & 0xffff00ff) | ((seqno & 0xff) << 8);
+ p[4] = t;
+
+ // queue up another rx command when required
+ if (streaming_p && --streaming_frame_count == 0){
+ streaming_frame_count = FRAMES_PER_CMD;
+ dsp_rx_regs->rx_time = 0;
+ }
+
+ return false; // we didn't handle the packet
+}
+#endif
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+ uint32_t status = buffer_pool_status->status;
+
+ dbsm_process_status(&dsp_tx_sm, status);
+ dbsm_process_status(&dsp_rx_sm, status);
+}
+
+int test_ram()
+{
+ int i,j,k;
+ output_regs->ram_page = 1<<10;
+
+ extram[0] = 0xDEADBEEF;
+ extram[1] = 0xF00D1234;
+ extram[7] = 0x76543210;
+
+ output_regs->ram_page = 2<<10;
+ extram[7] = 0x55555555;
+ extram[1] = 0xaaaaaaaa;
+ extram[0] = 0xeeeeeeee;
+
+ output_regs->ram_page = 1<<10;
+
+ i = extram[0];
+ k = extram[1];
+ j = extram[7];
+
+ if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) {
+ puts("RAM FAIL1!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+
+ output_regs->ram_page = 2<<10;
+
+ j = extram[7];
+ k = extram[1];
+ i = extram[0];
+
+ if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) {
+ puts("RAM FAIL2!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+ return 1;
+}
+
+int test_sd()
+{
+ int i = sd_init();
+ if(i==0) {
+ puts("FAILED INIT of Card\n");
+ return 0;
+ }
+
+ unsigned char buf[512];
+ i = sd_read_block(2048,buf);
+ if(i == 0) {
+ puts("READ Command Rejected\n");
+ return 0;
+ }
+ if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50))
+ ;
+ else {
+ puts("Read bad data from SD Card\n");
+ return 0;
+ }
+ return 1;
+}
+
+int
+main(void)
+{
+ u2_init();
+
+ putstr("\nFactory Test TXRX\n");
+
+ bool ok = true;
+ unsigned char maj = HW_REV_MAJOR;
+ unsigned char min = HW_REV_MINOR;
+ ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1);
+ ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1);
+
+ putstr("\nset_hw_rev\n");
+ if (ok)
+ printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ else {
+ printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ hal_finish();
+ return 0;
+ }
+
+ if(test_sd())
+ puts("SD OK\n");
+ else {
+ puts("SD FAIL\n");
+ hal_finish();
+ return 0;
+ }
+ if(test_ram())
+ puts("RAM OK\n");
+ else {
+ puts("RAM FAIL\n");
+ hal_finish();
+ return 0;
+ }
+
+ print_mac_addr(ethernet_mac_addr()->addr);
+ newline();
+
+}
Copied: gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev31.c (from
rev 10999, gnuradio/trunk/usrp2/firmware/apps/burnrev31.c)
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev31.c
(rev 0)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev31.c
2009-05-12 13:39:29 UTC (rev 11003)
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2007,2008 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include "bool.h"
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_common_v2.h"
+#include "memcpy_wa.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <i2c.h>
+#include <usrp2_i2c_addr.h>
+#include <clocks.h>
+#include "sd.h"
+
+#define HW_REV_MAJOR 3
+#define HW_REV_MINOR 1
+
+#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now)
+
+#if (FW_SETS_SEQNO)
+static int fw_seqno; // used when f/w is filling in sequence numbers
+#endif
+
+
+/*
+ * Full duplex Tx and Rx between ethernet and DSP pipelines
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow
+ * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow
+ */
+//#define CPU_RX_BUF 0 // eth -> cpu
+
+#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer)
+#define DSP_RX_BUF_1 3 // dsp rx -> eth
+#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer)
+#define DSP_TX_BUF_1 5 // eth -> dsp tx
+
+/*
+ * ================================================================
+ * configure DSP TX double buffering state machine (eth -> dsp)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp)
+// DSP Tx reads word0 (flags) + timestamp followed by samples
+
+#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4)
+
+// Receive from ethernet
+buf_cmd_args_t dsp_tx_recv_args = {
+ PORT_ETH,
+ 0,
+ BP_LAST_LINE
+};
+
+// send to DSP Tx
+buf_cmd_args_t dsp_tx_send_args = {
+ PORT_DSP,
+ DSP_TX_FIRST_LINE, // starts just past transport header
+ 0 // filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm; // the state machine
+
+/*
+ * ================================================================
+ * configure DSP RX double buffering state machine (dsp -> eth)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0)
+// DSP Rx writes timestamp followed by nlines_per_frame of samples
+#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4 + 1)
+
+// receive from DSP
+buf_cmd_args_t dsp_rx_recv_args = {
+ PORT_DSP,
+ DSP_RX_FIRST_LINE,
+ BP_LAST_LINE
+};
+
+// send to ETH
+buf_cmd_args_t dsp_rx_send_args = {
+ PORT_ETH,
+ 0, // starts with ethernet header in line 0
+ 0, // filled in from list_line register
+};
+
+dbsm_t dsp_rx_sm; // the state machine
+
+
+// The mac address of the host we're sending to.
+u2_mac_addr_t host_mac_addr;
+
+
+// variables for streaming mode
+
+static bool streaming_p = false;
+static unsigned int streaming_items_per_frame = 0;
+static int streaming_frame_count = 0;
+#define FRAMES_PER_CMD 1000
+
+bool is_streaming(void){ return streaming_p; }
+
+// ----------------------------------------------------------------
+
+
+void
+restart_streaming(void)
+{
+ // setup RX DSP regs
+ dsp_rx_regs->clear_state = 1; // reset
+
+ streaming_p = true;
+ streaming_frame_count = FRAMES_PER_CMD;
+
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1); // set "chain" bit
+
+ // kick off the state machine
+ dbsm_start(&dsp_rx_sm);
+
+ dsp_rx_regs->rx_time = 0; // enqueue first of two commands
+
+ // make sure this one and the rest have the "now" and "chain" bits set.
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1);
+
+ dsp_rx_regs->rx_time = 0; // enqueue second command
+}
+
+void
+start_rx_streaming_cmd(const u2_mac_addr_t *host, op_start_rx_streaming_t *p)
+{
+ host_mac_addr = *host; // remember who we're sending to
+
+ /*
+ * Construct ethernet header and word0 and preload into two buffers
+ */
+ u2_eth_packet_t pkt;
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.ehdr.dst = *host;
+ pkt.ehdr.ethertype = U2_ETHERTYPE;
+ u2p_set_word0(&pkt.fixed, 0, 0);
+ // DSP RX will fill in timestamp
+
+ memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt));
+ memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt));
+
+
+ if (FW_SETS_SEQNO)
+ fw_seqno = 0;
+
+ streaming_items_per_frame = p->items_per_frame;
+ restart_streaming();
+}
+
+
+void
+stop_rx_cmd(void)
+{
+ streaming_p = false;
+ dsp_rx_regs->clear_state = 1; // flush cmd queue
+ bp_clear_buf(DSP_RX_BUF_0);
+ bp_clear_buf(DSP_RX_BUF_1);
+}
+
+
+static void
+setup_tx()
+{
+ dsp_tx_regs->clear_state = 1;
+ bp_clear_buf(DSP_TX_BUF_0);
+ bp_clear_buf(DSP_TX_BUF_1);
+
+ int tx_scale = 256;
+ int interp = 32;
+
+ // setup some defaults
+
+ dsp_tx_regs->freq = 0;
+ dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale;
+ dsp_tx_regs->interp_rate = interp;
+}
+
+
+#if (FW_SETS_SEQNO)
+/*
+ * Debugging ONLY. This will be handled by the tx_protocol_engine.
+ *
+ * This is called when the DSP Rx chain has filled in a packet.
+ * We set and increment the seqno, then return false, indicating
+ * that we didn't handle the packet. A bit of a kludge
+ * but it should work.
+ */
+bool
+fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false
+{
+ uint32_t *p = buffer_ram(buf_this);
+ uint32_t seqno = fw_seqno++;
+
+ // KLUDGE all kinds of nasty magic numbers and embedded knowledge
+ uint32_t t = p[4];
+ t = (t & 0xffff00ff) | ((seqno & 0xff) << 8);
+ p[4] = t;
+
+ // queue up another rx command when required
+ if (streaming_p && --streaming_frame_count == 0){
+ streaming_frame_count = FRAMES_PER_CMD;
+ dsp_rx_regs->rx_time = 0;
+ }
+
+ return false; // we didn't handle the packet
+}
+#endif
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+ uint32_t status = buffer_pool_status->status;
+
+ dbsm_process_status(&dsp_tx_sm, status);
+ dbsm_process_status(&dsp_rx_sm, status);
+}
+
+int test_ram()
+{
+ int i,j,k;
+ output_regs->ram_page = 1<<10;
+
+ extram[0] = 0xDEADBEEF;
+ extram[1] = 0xF00D1234;
+ extram[7] = 0x76543210;
+
+ output_regs->ram_page = 2<<10;
+ extram[7] = 0x55555555;
+ extram[1] = 0xaaaaaaaa;
+ extram[0] = 0xeeeeeeee;
+
+ output_regs->ram_page = 1<<10;
+
+ i = extram[0];
+ k = extram[1];
+ j = extram[7];
+
+ if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) {
+ puts("RAM FAIL1!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+
+ output_regs->ram_page = 2<<10;
+
+ j = extram[7];
+ k = extram[1];
+ i = extram[0];
+
+ if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) {
+ puts("RAM FAIL2!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+ return 1;
+}
+
+int test_sd()
+{
+ int i = sd_init();
+ if(i==0) {
+ puts("FAILED INIT of Card\n");
+ return 0;
+ }
+
+ unsigned char buf[512];
+ i = sd_read_block(2048,buf);
+ if(i == 0) {
+ puts("READ Command Rejected\n");
+ return 0;
+ }
+ if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50))
+ ;
+ else {
+ puts("Read bad data from SD Card\n");
+ return 0;
+ }
+ return 1;
+}
+
+int
+main(void)
+{
+ u2_init();
+
+ putstr("\nFactory Test TXRX\n");
+
+ bool ok = true;
+ unsigned char maj = HW_REV_MAJOR;
+ unsigned char min = HW_REV_MINOR;
+ ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1);
+ ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1);
+
+ putstr("\nset_hw_rev\n");
+ if (ok)
+ printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ else {
+ printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ hal_finish();
+ return 0;
+ }
+
+ if(test_sd())
+ puts("SD OK\n");
+ else {
+ puts("SD FAIL\n");
+ hal_finish();
+ return 0;
+ }
+ if(test_ram())
+ puts("RAM OK\n");
+ else {
+ puts("RAM FAIL\n");
+ hal_finish();
+ return 0;
+ }
+
+ print_mac_addr(ethernet_mac_addr()->addr);
+ newline();
+
+}
Copied: gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev40.c (from
rev 10999, gnuradio/trunk/usrp2/firmware/apps/burnrev40.c)
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev40.c
(rev 0)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/apps/burnrev40.c
2009-05-12 13:39:29 UTC (rev 11003)
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2007,2008 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include "bool.h"
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_common_v2.h"
+#include "memcpy_wa.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <i2c.h>
+#include <usrp2_i2c_addr.h>
+#include <clocks.h>
+#include "sd.h"
+
+#define HW_REV_MAJOR 4
+#define HW_REV_MINOR 0
+
+#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now)
+
+#if (FW_SETS_SEQNO)
+static int fw_seqno; // used when f/w is filling in sequence numbers
+#endif
+
+
+/*
+ * Full duplex Tx and Rx between ethernet and DSP pipelines
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow
+ * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow
+ */
+//#define CPU_RX_BUF 0 // eth -> cpu
+
+#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer)
+#define DSP_RX_BUF_1 3 // dsp rx -> eth
+#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer)
+#define DSP_TX_BUF_1 5 // eth -> dsp tx
+
+/*
+ * ================================================================
+ * configure DSP TX double buffering state machine (eth -> dsp)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp)
+// DSP Tx reads word0 (flags) + timestamp followed by samples
+
+#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4)
+
+// Receive from ethernet
+buf_cmd_args_t dsp_tx_recv_args = {
+ PORT_ETH,
+ 0,
+ BP_LAST_LINE
+};
+
+// send to DSP Tx
+buf_cmd_args_t dsp_tx_send_args = {
+ PORT_DSP,
+ DSP_TX_FIRST_LINE, // starts just past transport header
+ 0 // filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm; // the state machine
+
+/*
+ * ================================================================
+ * configure DSP RX double buffering state machine (dsp -> eth)
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0)
+// DSP Rx writes timestamp followed by nlines_per_frame of samples
+#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) +
sizeof(u2_transport_hdr_t))/4 + 1)
+
+// receive from DSP
+buf_cmd_args_t dsp_rx_recv_args = {
+ PORT_DSP,
+ DSP_RX_FIRST_LINE,
+ BP_LAST_LINE
+};
+
+// send to ETH
+buf_cmd_args_t dsp_rx_send_args = {
+ PORT_ETH,
+ 0, // starts with ethernet header in line 0
+ 0, // filled in from list_line register
+};
+
+dbsm_t dsp_rx_sm; // the state machine
+
+
+// The mac address of the host we're sending to.
+u2_mac_addr_t host_mac_addr;
+
+
+// variables for streaming mode
+
+static bool streaming_p = false;
+static unsigned int streaming_items_per_frame = 0;
+static int streaming_frame_count = 0;
+#define FRAMES_PER_CMD 1000
+
+bool is_streaming(void){ return streaming_p; }
+
+// ----------------------------------------------------------------
+
+
+void
+restart_streaming(void)
+{
+ // setup RX DSP regs
+ dsp_rx_regs->clear_state = 1; // reset
+
+ streaming_p = true;
+ streaming_frame_count = FRAMES_PER_CMD;
+
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1); // set "chain" bit
+
+ // kick off the state machine
+ dbsm_start(&dsp_rx_sm);
+
+ dsp_rx_regs->rx_time = 0; // enqueue first of two commands
+
+ // make sure this one and the rest have the "now" and "chain" bits set.
+ dsp_rx_regs->rx_command =
+ MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+ streaming_items_per_frame,
+ 1, 1);
+
+ dsp_rx_regs->rx_time = 0; // enqueue second command
+}
+
+void
+start_rx_streaming_cmd(const u2_mac_addr_t *host, op_start_rx_streaming_t *p)
+{
+ host_mac_addr = *host; // remember who we're sending to
+
+ /*
+ * Construct ethernet header and word0 and preload into two buffers
+ */
+ u2_eth_packet_t pkt;
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.ehdr.dst = *host;
+ pkt.ehdr.ethertype = U2_ETHERTYPE;
+ u2p_set_word0(&pkt.fixed, 0, 0);
+ // DSP RX will fill in timestamp
+
+ memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt));
+ memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt));
+
+
+ if (FW_SETS_SEQNO)
+ fw_seqno = 0;
+
+ streaming_items_per_frame = p->items_per_frame;
+ restart_streaming();
+}
+
+
+void
+stop_rx_cmd(void)
+{
+ streaming_p = false;
+ dsp_rx_regs->clear_state = 1; // flush cmd queue
+ bp_clear_buf(DSP_RX_BUF_0);
+ bp_clear_buf(DSP_RX_BUF_1);
+}
+
+
+static void
+setup_tx()
+{
+ dsp_tx_regs->clear_state = 1;
+ bp_clear_buf(DSP_TX_BUF_0);
+ bp_clear_buf(DSP_TX_BUF_1);
+
+ int tx_scale = 256;
+ int interp = 32;
+
+ // setup some defaults
+
+ dsp_tx_regs->freq = 0;
+ dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale;
+ dsp_tx_regs->interp_rate = interp;
+}
+
+
+#if (FW_SETS_SEQNO)
+/*
+ * Debugging ONLY. This will be handled by the tx_protocol_engine.
+ *
+ * This is called when the DSP Rx chain has filled in a packet.
+ * We set and increment the seqno, then return false, indicating
+ * that we didn't handle the packet. A bit of a kludge
+ * but it should work.
+ */
+bool
+fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false
+{
+ uint32_t *p = buffer_ram(buf_this);
+ uint32_t seqno = fw_seqno++;
+
+ // KLUDGE all kinds of nasty magic numbers and embedded knowledge
+ uint32_t t = p[4];
+ t = (t & 0xffff00ff) | ((seqno & 0xff) << 8);
+ p[4] = t;
+
+ // queue up another rx command when required
+ if (streaming_p && --streaming_frame_count == 0){
+ streaming_frame_count = FRAMES_PER_CMD;
+ dsp_rx_regs->rx_time = 0;
+ }
+
+ return false; // we didn't handle the packet
+}
+#endif
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+ uint32_t status = buffer_pool_status->status;
+
+ dbsm_process_status(&dsp_tx_sm, status);
+ dbsm_process_status(&dsp_rx_sm, status);
+}
+
+int test_ram()
+{
+ int i,j,k;
+ output_regs->ram_page = 1<<10;
+
+ extram[0] = 0xDEADBEEF;
+ extram[1] = 0xF00D1234;
+ extram[7] = 0x76543210;
+
+ output_regs->ram_page = 2<<10;
+ extram[7] = 0x55555555;
+ extram[1] = 0xaaaaaaaa;
+ extram[0] = 0xeeeeeeee;
+
+ output_regs->ram_page = 1<<10;
+
+ i = extram[0];
+ k = extram[1];
+ j = extram[7];
+
+ if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) {
+ puts("RAM FAIL1!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+
+ output_regs->ram_page = 2<<10;
+
+ j = extram[7];
+ k = extram[1];
+ i = extram[0];
+
+ if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) {
+ puts("RAM FAIL2!\n");
+ puthex32_nl(i);
+ puthex32_nl(j);
+ puthex32_nl(k);
+ return 0;
+ }
+ return 1;
+}
+
+int test_sd()
+{
+ int i = sd_init();
+ if(i==0) {
+ puts("FAILED INIT of Card\n");
+ return 0;
+ }
+
+ unsigned char buf[512];
+ i = sd_read_block(2048,buf);
+ if(i == 0) {
+ puts("READ Command Rejected\n");
+ return 0;
+ }
+ if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50))
+ ;
+ else {
+ puts("Read bad data from SD Card\n");
+ return 0;
+ }
+ return 1;
+}
+
+int
+main(void)
+{
+ u2_init();
+
+ putstr("\nFactory Test TXRX\n");
+
+ bool ok = true;
+ unsigned char maj = HW_REV_MAJOR;
+ unsigned char min = HW_REV_MINOR;
+ ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1);
+ ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1);
+
+ putstr("\nset_hw_rev\n");
+ if (ok)
+ printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ else {
+ printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR);
+ hal_finish();
+ return 0;
+ }
+
+ if(test_sd())
+ puts("SD OK\n");
+ else {
+ puts("SD FAIL\n");
+ hal_finish();
+ return 0;
+ }
+ if(test_ram())
+ puts("RAM OK\n");
+ else {
+ puts("RAM FAIL\n");
+ hal_finish();
+ return 0;
+ }
+
+ print_mac_addr(ethernet_mac_addr()->addr);
+ newline();
+
+}
Modified: gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_init.c
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_init.c 2009-05-12
13:35:42 UTC (rev 11002)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_init.c 2009-05-12
13:39:29 UTC (rev 11003)
@@ -267,8 +267,8 @@
//printf("db_init: tx dbid = 0x%x\n", tx_dboard->dbid);
set_gpio_mode(GPIO_TX_BANK, tx_dboard);
tx_dboard->init(tx_dboard);
- //m = determine_tx_mux_value(tx_dboard);
- //dsp_tx_regs->tx_mux = m;
+ m = determine_tx_mux_value(tx_dboard);
+ dsp_tx_regs->tx_mux = m;
//printf("tx_mux = 0x%x\n", m);
tx_dboard->current_lo_offset = tx_dboard->default_lo_offset;
Modified: gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_rfx.c
===================================================================
--- gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_rfx.c 2009-05-12
13:35:42 UTC (rev 11002)
+++ gnuradio/branches/releases/3.2/usrp2/firmware/lib/db_rfx.c 2009-05-12
13:39:29 UTC (rev 11003)
@@ -177,7 +177,7 @@
//.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx),
//.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx),
.base.is_quadrature = true,
- .base.i_and_q_swapped = true,
+ .base.i_and_q_swapped = false,
.base.spectrum_inverted = false,
.base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6),
.base.init = rfx_init_tx,
@@ -238,7 +238,7 @@
//.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx),
//.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx),
.base.is_quadrature = true,
- .base.i_and_q_swapped = true,
+ .base.i_and_q_swapped = false,
.base.spectrum_inverted = false,
.base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6),
.base.init = rfx_init_tx,
@@ -299,7 +299,7 @@
//.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx),
//.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx),
.base.is_quadrature = true,
- .base.i_and_q_swapped = true,
+ .base.i_and_q_swapped = false,
.base.spectrum_inverted = false,
.base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6),
.base.init = rfx_init_tx,
@@ -360,7 +360,7 @@
//.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx),
//.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx),
.base.is_quadrature = true,
- .base.i_and_q_swapped = true,
+ .base.i_and_q_swapped = false,
.base.spectrum_inverted = false,
.base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6),
.base.init = rfx_init_tx,
@@ -422,7 +422,7 @@
//.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx),
//.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx),
.base.is_quadrature = true,
- .base.i_and_q_swapped = true,
+ .base.i_and_q_swapped = false,
.base.spectrum_inverted = false,
.base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6),
.base.init = rfx_init_tx,
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r11003 - in gnuradio/branches/releases/3.2: . gnuradio-core/src/python/gnuradio/gr gr-qtgui/src/python gr-wxgui/src/python/plotter grc/data/platforms/python/blocks usrp2/firmware/apps usrp2/firmware/lib,
jcorgan <=