[Commit-gnuradio] r10933 - usrp-hw/trunk/sym/generated

[jblum]

Author: jblum
Date: 2009-04-30 17:54:11 -0600 (Thu, 30 Apr 2009)
New Revision: 10933

Added:
   usrp-hw/trunk/sym/generated/vcxo_6pin.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
added 6pin vcxo sym

Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2009-04-30 19:57:02 UTC (rev 
10932)
+++ usrp-hw/trunk/sym/generated/Makefile        2009-04-30 23:54:11 UTC (rev 
10933)
@@ -269,7 +269,8 @@
        txs0206.sym \
        xenpak-x2-XAUI.sym \
        xenpak-x2-PWR.sym \
-       xenpak-x2-CTRL.sym
+       xenpak-x2-CTRL.sym \
+       vcxo_6pin.sym
 
 all : $(SOURCES)
 

Added: usrp-hw/trunk/sym/generated/vcxo_6pin.src
===================================================================
--- usrp-hw/trunk/sym/generated/vcxo_6pin.src                           (rev 0)
+++ usrp-hw/trunk/sym/generated/vcxo_6pin.src   2009-04-30 23:54:11 UTC (rev 
10933)
@@ -0,0 +1,57 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=XXXX
+name=VCXO_6PIN
+device=VCXO_6PIN
+refdes=U?
+footprint=vcxo_6pin
+description=VCXO_6PIN
+documentation=N/A
+author=jblum
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              in      line    r               VCtrl
+2              in      line    r               NC
+3              pwr     line    r               GND
+6              pwr     line    l               VCC
+5              in      line    l               NC
+4              out     line    l               OUT