[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r10296 - gnuradio/trunk/usrp2/firmware/lib
From: |
eb |
Subject: |
[Commit-gnuradio] r10296 - gnuradio/trunk/usrp2/firmware/lib |
Date: |
Fri, 23 Jan 2009 16:14:59 -0700 (MST) |
Author: eb
Date: 2009-01-23 16:14:58 -0700 (Fri, 23 Jan 2009)
New Revision: 10296
Modified:
gnuradio/trunk/usrp2/firmware/lib/bsm12.c
gnuradio/trunk/usrp2/firmware/lib/bsm12.h
gnuradio/trunk/usrp2/firmware/lib/stdint.h
Log:
mimo tx work-in-progress
Modified: gnuradio/trunk/usrp2/firmware/lib/bsm12.c
===================================================================
--- gnuradio/trunk/usrp2/firmware/lib/bsm12.c 2009-01-23 19:49:20 UTC (rev
10295)
+++ gnuradio/trunk/usrp2/firmware/lib/bsm12.c 2009-01-23 23:14:58 UTC (rev
10296)
@@ -16,6 +16,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+/*
+ * buffer state machine: 1 input to two outputs
+ *
+ * Typically used to read packets from the ethernet and then after inspecting,
+ * handle the packet in firmware or pass it on to 1 of the 2 buffer
destinations.
+ */
+
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
@@ -35,9 +42,12 @@
} buffer_state_t;
static buffer_state_t buffer_state[NBUFFERS];
-static unsigned char buffer_dst[NBUFFERS]; // 0 or 1
static uint32_t last_send_ctrl[NBUFFERS];
+static int8_t buffer_target[NBUFFERS]; // -1, 0 or 1.
+static uint8_t buffer_dst[NBUFFERS]; // 0 or 1. Valid only when
BF_EMPTYING
+#define ST_IDLE (-1)
+
void
bsm12_init(bsm12_t *sm, int buf0,
const buf_cmd_args_t *recv,
@@ -54,9 +64,9 @@
sm->send_args[0] = *send0;
sm->send_args[1] = *send1;
- sm->rx_idle = true;
- sm->tx_idle[0] = true;
- sm->tx_idle[1] = true;
+ sm->rx_state = ST_IDLE;
+ sm->tx_state[0] = ST_IDLE;
+ sm->tx_state[1] = ST_IDLE;
sm->inspect = inspect;
@@ -72,6 +82,17 @@
buffer_state[sm->buf0 + 1] = BS_EMPTY;
buffer_state[sm->buf0 + 2] = BS_EMPTY;
+ buffer_target[sm->buf0 + 0] = -1;
+ buffer_target[sm->buf0 + 1] = -1;
+ buffer_target[sm->buf0 + 2] = -1;
+
+ for (int i = 0; i < NBUFFERS; i++)
+ sm->next_buf[i] = buf0;
+
+ sm->next_buf[buf0 + 0] = buf0 + 1;
+ sm->next_buf[buf0 + 1] = buf0 + 2;
+ sm->next_buf[buf0 + 2] = buf0 + 0;
+
for (int i = 0; i < 3; i++){
sm->precomputed_receive_to_buf_ctrl_word[i] =
(BPC_READ
@@ -102,11 +123,15 @@
static inline void
bsm12_send_from_buf(bsm12_t *sm, int bufno, int dst_idx)
{
- uint32_t t = (sm->precomputed_send_from_buf_ctrl_word[bufno & 0x3][dst_idx]
- | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] -
sm->last_line_adj));
+ dst_idx &= 0x1;
+ uint32_t t =
+ (sm->precomputed_send_from_buf_ctrl_word[bufno & 0x3][dst_idx]
+ | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] -
sm->last_line_adj));
+
buffer_pool_ctrl->ctrl = t;
last_send_ctrl[bufno] = t;
+ buffer_dst[bufno] = dst_idx;
}
static inline void
@@ -124,13 +149,17 @@
buffer_state[sm->buf0 + 1] = BS_EMPTY;
buffer_state[sm->buf0 + 2] = BS_EMPTY;
+ buffer_target[sm->buf0 + 0] = -1;
+ buffer_target[sm->buf0 + 1] = -1;
+ buffer_target[sm->buf0 + 2] = -1;
+
bp_clear_buf(sm->buf0 + 0);
bp_clear_buf(sm->buf0 + 1);
bp_clear_buf(sm->buf0 + 2);
- sm->rx_idle = false;
- sm->tx_idle[0] = true;
- sm->tx_idle[1] = true;
+ sm->rx_state = 0;
+ sm->tx_state[0] = ST_IDLE;
+ sm->tx_state[1] = ST_IDLE;
bsm12_receive_to_buf(sm, sm->buf0);
buffer_state[sm->buf0] = BS_FILLING;
}
@@ -182,6 +211,87 @@
static void
bsm12_process_helper(bsm12_t *sm, int buf_this)
{
+ bp_clear_buf(buf_this);
+
+ if (buffer_state[buf_this] == BS_FILLING){
+
+ buffer_state[buf_this] = BS_FULL;
+ buffer_target[buf_this] = -1;
+
+ //
+ // where does this packet go?
+ //
+ int dst = sm->inspect(sm, buf_this);
+ if (dst == -1){
+ //
+ // f/w handled the packet; refill the buffer
+ //
+ bsm12_receive_to_buf(sm, buf_this);
+ buffer_state[buf_this] = BS_FILLING;
+ buffer_target[buf_this] = -1;
+ sm->rx_state = buf_this & 0x3;
+ }
+ else { // goes to dst 0 or 1
+ //
+ // If the next buffer is empty, start a receive on it
+ //
+ int t = sm->next_buf[buf_this];
+ if (buffer_state[t] == BS_EMPTY){
+ bsm12_receive_to_buf(sm, t);
+ buffer_state[t] = BS_FILLING;
+ buffer_target[t] = -1;
+ sm->rx_state = t & 0x3;
+ }
+ else
+ sm->rx_state = ST_IDLE;
+
+ //
+ // If the destination is idle, start the xfer, othewise remember it
+ //
+ if (sm->tx_state[dst] == ST_IDLE){
+ bsm12_send_from_buf(sm, buf_this, dst);
+ sm->tx_state[dst] = buf_this & 0x3;
+ buffer_state[buf_this] = BS_EMPTYING;
+ buffer_target[buf_this] = -1;
+ }
+ else {
+ buffer_target[buf_this] = dst;
+ }
+ }
+ }
+
+ else { // BS_EMPTYING
+
+ buffer_state[buf_this] = BS_EMPTY;
+ buffer_target[buf_this] = -1;
+
+ if (sm->rx_state == ST_IDLE){ // fire off another receive
+ sm->rx_state = buf_this & 0x3;
+ bsm12_receive_to_buf(sm, buf_this);
+ buffer_state[buf_this] = BS_FILLING;
+ buffer_target[buf_this] = -1;
+ }
+
+ int dst = buffer_dst[buf_this]; // the dst we were emptying into
+ // is the next buffer full and for us?
+ int t = sm->next_buf[buf_this];
+ if (buffer_target[t] == dst){ // yes,
+ bsm12_send_from_buf(sm, t, dst); // send it
+ buffer_state[t] = BS_EMPTYING;
+ buffer_target[t] = -1;
+ sm->tx_state[dst] = t & 0x3;
+ }
+ // how about the one after that?
+ else if (buffer_target[t=sm->next_buf[t]] == dst){ // yes,
+ bsm12_send_from_buf(sm, t, dst); // send it
+ buffer_state[t] = BS_EMPTYING;
+ buffer_target[t] = -1;
+ sm->tx_state[dst] = t & 0x3;
+ }
+ else {
+ sm->tx_state[dst] = ST_IDLE;
+ }
+ }
}
static void
Modified: gnuradio/trunk/usrp2/firmware/lib/bsm12.h
===================================================================
--- gnuradio/trunk/usrp2/firmware/lib/bsm12.h 2009-01-23 19:49:20 UTC (rev
10295)
+++ gnuradio/trunk/usrp2/firmware/lib/bsm12.h 2009-01-23 23:14:58 UTC (rev
10296)
@@ -19,7 +19,8 @@
#ifndef INCLUDED_BSM12_H
#define INCLUDED_BSM12_H
-#include <dbsm.h>
+#include "dbsm.h"
+#include "memory_map.h"
/*!
* buffer state machine: 1 input to two outputs
@@ -37,7 +38,7 @@
* \param sm the state machine
* \param buf_this the index of the buffer to inspect and/or pass on
*
- * Returns -1, 0 or 1. If it returns zero, it means that the s/w
+ * Returns -1, 0 or 1. If it returns -1, it means that the s/w
* handled that packet, and that it should NOT be passed on to one of
* the buffer endpoints. 0 indicates the first endpoint, 1 the second
endpoint.
*/
@@ -49,19 +50,21 @@
*/
struct _bsm12
{
- uint8_t buf0; // This machine uses buf0, buf0+1 and buf0+2.
buf0 % 4 == 0.
+ uint8_t buf0; // This machine uses buf0, buf0+1 and buf0+2. buf0 %
4 == 0.
uint8_t running;
- uint8_t rx_idle;
- uint8_t tx_idle[2];
+ int8_t rx_state; // -1, 0, 1, 2 which buffer we're receiving
into
+ int8_t tx_state[2]; // -1, 0, 1, 2 which buffer we're sending from
buf_cmd_args_t recv_args;
buf_cmd_args_t send_args[2];
bsm12_inspector_t inspect;
+ int last_line_adj;
uint32_t bps_error;
uint32_t bps_done;
uint32_t bps_error_or_done;
+ uint8_t next_buf[NBUFFERS];
uint32_t precomputed_receive_to_buf_ctrl_word[3];
- uint32_t precomputed_send_from_buf_ctrl_word[4][2]; // really only 3,
not 4 (easier addr comp)
- int last_line_adj;
+ uint32_t precomputed_send_from_buf_ctrl_word[4][2]; // really only 3,
not 4
+ // (easier
addr comp)
};
void bsm12_init(bsm12_t *sm, int buf0,
Modified: gnuradio/trunk/usrp2/firmware/lib/stdint.h
===================================================================
--- gnuradio/trunk/usrp2/firmware/lib/stdint.h 2009-01-23 19:49:20 UTC (rev
10295)
+++ gnuradio/trunk/usrp2/firmware/lib/stdint.h 2009-01-23 23:14:58 UTC (rev
10296)
@@ -1,6 +1,6 @@
/* -*- c -*- */
/*
- * Copyright 2007 Free Software Foundation, Inc.
+ * Copyright 2007,2009 Free Software Foundation, Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@
#ifndef INCLUDED_STDINT_H
#define INCLUDED_STDINT_H
-typedef char int8_t;
+typedef signed char int8_t;
typedef unsigned char uint8_t;
typedef short int16_t;
typedef unsigned short uint16_t;
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r10296 - gnuradio/trunk/usrp2/firmware/lib,
eb <=