[Commit-gnuradio] r10258 - gnuradio/trunk/usrp2/fpga/sdr_lib

[matt]

Author: matt
Date: 2009-01-18 21:39:47 -0700 (Sun, 18 Jan 2009)
New Revision: 10258

Modified:
   gnuradio/trunk/usrp2/fpga/sdr_lib/dsp_core_tx.v
Log:
widen cordic on tx side


Modified: gnuradio/trunk/usrp2/fpga/sdr_lib/dsp_core_tx.v
===================================================================
--- gnuradio/trunk/usrp2/fpga/sdr_lib/dsp_core_tx.v     2009-01-19 04:35:49 UTC 
(rev 10257)
+++ gnuradio/trunk/usrp2/fpga/sdr_lib/dsp_core_tx.v     2009-01-19 04:39:47 UTC 
(rev 10258)
@@ -103,15 +103,21 @@
                  .signal_in(hb2_q),.signal_out(q_interp));
 
    assign      strobe = strobe_hb1;
-                  
-   cordic #(.bitwidth(18),.zwidth(16))
+
+   localparam  cwidth = 24;  // was 18
+   localparam  zwidth = 24;  // was 16
+
+   wire [cwidth-1:0] da_c, db_c;
+   
+   cordic_z24 #(.bitwidth(cwidth))
      cordic(.clock(clk), .reset(rst), .enable(run),
-           .xi(i_interp),.yi(q_interp),.zi(phase[31:16]),
-           .xo(da),.yo(db),.zo() );
+           
.xi({i_interp,{(cwidth-18){1'b0}}}),.yi({q_interp,{(cwidth-18){1'b0}}}),
+           .zi(phase[31:32-zwidth]),
+           .xo(da_c),.yo(db_c),.zo() );
    
    MULT18X18S MULT18X18S_inst 
      (.P(prod_i),    // 36-bit multiplier output
-      .A(da),    // 18-bit multiplier input
+      .A(da_c[cwidth-1:cwidth-18]),    // 18-bit multiplier input
       .B({{2{scale_i[15]}},scale_i}),    // 18-bit multiplier input
       .C(clk),    // Clock input
       .CE(1),  // Clock enable input
@@ -120,7 +126,7 @@
    
    MULT18X18S MULT18X18S_inst_2 
      (.P(prod_q),    // 36-bit multiplier output
-      .A(db),    // 18-bit multiplier input
+      .A(db_c[cwidth-1:cwidth-18]),    // 18-bit multiplier input
       .B({{2{scale_q[15]}},scale_q}),    // 18-bit multiplier input
       .C(clk),    // Clock input
       .CE(1),  // Clock enable input