[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r10206 - usrp-hw/trunk/sym/generated
|
From: |
matt |
|
Subject: |
[Commit-gnuradio] r10206 - usrp-hw/trunk/sym/generated |
|
Date: |
Mon, 12 Jan 2009 00:11:53 -0700 (MST) |
Author: matt
Date: 2009-01-12 00:11:52 -0700 (Mon, 12 Jan 2009)
New Revision: 10206
Added:
usrp-hw/trunk/sym/generated/pi2eqx4402d-A.src
usrp-hw/trunk/sym/generated/pi2eqx4402d-B.src
usrp-hw/trunk/sym/generated/pi2eqx4402d-C.src
usrp-hw/trunk/sym/generated/pi2eqx4402d-CLK.src
usrp-hw/trunk/sym/generated/pi2eqx4402d-D.src
usrp-hw/trunk/sym/generated/pi2eqx4402d-PWR.src
usrp-hw/trunk/sym/generated/sfp.src
Modified:
usrp-hw/trunk/sym/generated/Makefile
Log:
new parts
Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile 2009-01-11 07:57:08 UTC (rev
10205)
+++ usrp-hw/trunk/sym/generated/Makefile 2009-01-12 07:11:52 UTC (rev
10206)
@@ -224,6 +224,13 @@
et1011c2-CLK.sym \
sn74lvc1t45.sym \
tps54350pwp.sym \
+ sfp.sym \
+ pi2eqx4402d-PWR.sym \
+ pi2eqx4402d-A.sym \
+ pi2eqx4402d-B.sym \
+ pi2eqx4402d-C.sym \
+ pi2eqx4402d-D.sym \
+ pi2eqx4402d-CLK.sym \
lt55x4.sym
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-A.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-A.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-A.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,68 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-A
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+
+C3 in line l AI+
+D3 in dot l \_AI-\_
+C10 out line r AO+
+D10 out dot r \_AO-\_
+
+A9 in line l EN_A
+A1 out line r SD_A
+
+A3 in line l SEL_A[0]
+B4 in line l SEL_A[1]
+B5 in line l SEL_A[2]
+B6 in line l SEL_A[3]
+A5 in line l SEL_A[4]
+B7 in line l SEL_A[5]
+A7 in line l SEL_A[6]
+
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-B.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-B.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-B.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,70 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-B
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+
+C8 in line l BI+
+D8 in dot l \_BI-\_
+C1 out line r BO+
+D1 out dot r \_BO-\_
+
+A10 in line l EN_B
+A2 out line r SD_B
+
+A4 in line l SEL_B[0]
+C4 in line l SEL_B[1]
+C5 in line l SEL_B[2]
+C6 in line l SEL_B[3]
+A6 in line l SEL_B[4]
+C7 in line l SEL_B[5]
+A8 in line l SEL_B[6]
+
+
+
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-C.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-C.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-C.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,68 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-C
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+
+G3 in line l CI+
+H3 in dot l \_CI-\_
+G10 out line r CO+
+H10 out dot r \_CO-\_
+
+B9 in line l EN_C
+B2 out line r SD_C
+
+G2 in line l SEL_C[0]
+J2 in line l SEL_C[1]
+J4 in line l SEL_C[2]
+K3 in line l SEL_C[3]
+K4 in line l SEL_C[4]
+K9 in line l SEL_C[5]
+G9 in line l SEL_C[6]
+
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-CLK.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-CLK.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-CLK.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,62 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-CLK
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+
+H5 in clk l CLKIN+
+H6 in dotclk l \_CLKIN-\_
+
+K5 out clk r CLKOUT0+
+K6 out dotclk r \_CLKOUT0-\_
+
+K7 out clk r CLKOUT1+
+K8 out dotclk r \_CLKOUT1-\_
+
+K1 in line l EN_clk
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-D.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-D.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-D.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,68 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-D
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+
+G8 in line l DI+
+H8 in dot l \_DI-\_
+G1 out line r DO+
+H1 out dot r \_DO-\_
+
+C9 in line l EN_D
+C2 out line r SD_D
+
+H2 in line l SEL_D[0]
+K2 in line l SEL_D[1]
+J5 in line l SEL_D[2]
+J6 in line l SEL_D[3]
+J9 in line l SEL_D[4]
+K10 in line l SEL_D[5]
+H9 in line l SEL_D[6]
+
Added: usrp-hw/trunk/sym/generated/pi2eqx4402d-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/pi2eqx4402d-PWR.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/pi2eqx4402d-PWR.src 2009-01-12 07:11:52 UTC
(rev 10206)
@@ -0,0 +1,78 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=PI2EQX4402-PWR
+device=PI2EQX4402
+refdes=U?
+footprint=NB84
+description=PCI x2 Repeater/Equalizer
+documentation=http://www.pericom.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+B1 pwr line l Vdd
+F1 pwr line l Vdd
+D2 pwr line l Vdd
+E2 pwr line l Vdd
+B3 pwr line l Vdd
+F3 pwr line l Vdd
+H4 pwr line l Vdd
+B8 pwr line l Vdd
+F8 pwr line l Vdd
+B10 pwr line l Vdd
+F10 pwr line l Vdd
+
+E1 pwr line r GND
+J1 pwr line r GND
+F2 pwr line r GND
+E3 pwr line r GND
+J3 pwr line r GND
+H7 pwr line r GND
+E8 pwr line r GND
+J8 pwr line r GND
+D9 pwr line r GND
+E9 pwr line r GND
+F9 pwr line r GND
+E10 pwr line r GND
+J10 pwr line r GND
+
+J7 pas line b Iref
Added: usrp-hw/trunk/sym/generated/sfp.src
===================================================================
--- usrp-hw/trunk/sym/generated/sfp.src (rev 0)
+++ usrp-hw/trunk/sym/generated/sfp.src 2009-01-12 07:11:52 UTC (rev 10206)
@@ -0,0 +1,86 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=SFP
+device=SFP
+refdes=J?
+footprint=SFP
+description=SFP Module
+#documentation=
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+15 pwr line l VccR
+16 pwr line l VccT
+9 pwr line l VeeR
+10 pwr line l VeeR
+11 pwr line l VeeR
+14 pwr line l VeeR
+1 pwr line l VeeT
+17 pwr line l VeeT
+20 pwr line l VeeT
+21 pwr line l CASE_GND
+22 pwr line l CASE_GND
+23 pwr line l CASE_GND
+24 pwr line l CASE_GND
+25 pwr line l CASE_GND
+26 pwr line l CASE_GND
+27 pwr line l CASE_GND
+28 pwr line l CASE_GND
+29 pwr line l CASE_GND
+30 pwr line l CASE_GND
+31 pwr line l CASE_GND
+
+
+13 in line r RX_P
+12 in dot r \_RX_N\_
+
+18 out line r TX_P
+19 out dot r \_TX_N\_
+
+2 out line r TX_FAULT
+3 in line r TX_DISABLE
+4 in line r MOD_DEF2
+5 in line r MOD_DEF1
+6 in line r MOD_DEF0
+7 in line r RATE_SEL
+8 in line r LOS
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r10206 - usrp-hw/trunk/sym/generated,
matt <=