[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r10169 - usrp-hw/trunk/sym/generated
|
From: |
matt |
|
Subject: |
[Commit-gnuradio] r10169 - usrp-hw/trunk/sym/generated |
|
Date: |
Fri, 26 Dec 2008 17:55:15 -0700 (MST) |
Author: matt
Date: 2008-12-26 17:55:15 -0700 (Fri, 26 Dec 2008)
New Revision: 10169
Added:
usrp-hw/trunk/sym/generated/et1011c2-CFGLED.src
usrp-hw/trunk/sym/generated/et1011c2-CLK.src
usrp-hw/trunk/sym/generated/et1011c2-GMII.src
usrp-hw/trunk/sym/generated/et1011c2-JTAG.src
usrp-hw/trunk/sym/generated/et1011c2-MDI.src
usrp-hw/trunk/sym/generated/et1011c2-MGT.src
usrp-hw/trunk/sym/generated/et1011c2-PWR.src
Log:
new Gigabit phy
Added: usrp-hw/trunk/sym/generated/et1011c2-CFGLED.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-CFGLED.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-CFGLED.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,63 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=5200
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-CFG
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 7 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+16 in line l MAC_IF_SEL0
+17 in line l MAC_IF_SEL1
+18 in line l MAC_IF_SEL2
+40 in line l PHYAD4
+41 in line l PHYAD3
+42 in line l PHYAD2
+43 in line l PHYAD1/LED100
+44 in line l PHYAD0/LED_TXRX
+13 in line l SYS_CLK_EN_N/SHARED
+14 in line l LPED_EN_N/SHARED
+49 in line l SPEED_1000/LED1000
+50 in line l PAUSE/LED_LNK
Added: usrp-hw/trunk/sym/generated/et1011c2-CLK.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-CLK.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-CLK.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,56 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-CLK
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 6 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+22 io clk l CLK_IN/XTAL_1
+23 io clk l XTAL_2
+24 in line l \_RESET\_
+57 out line r SYS_CLK
+
Added: usrp-hw/trunk/sym/generated/et1011c2-GMII.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-GMII.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-GMII.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,79 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=2400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-GMII
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 4 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+73 out line l COL
+74 out line l CRS
+72 out line l RX_CLK
+70 out line l RX_ER
+69 out line l RX_DV
+68 out line l RXD0
+67 out line l RXD1
+66 out line l RXD2
+65 out line l RXD3
+62 out line l RXD4
+61 out line l RXD5
+60 out line l RXD6
+59 out line l RXD7
+
+77 in line r GTX_CLK
+78 in line r TX_ER
+79 in line r TX_EN
+
+80 in line r TXD0
+81 in line r TXD1
+82 in line r TXD2
+83 in line r TXD3
+84 in line r TXD4
+1 in line r TXD5
+2 in line r TXD6
+3 in line r TXD7
+
+75 out line r TX_CLK
Added: usrp-hw/trunk/sym/generated/et1011c2-JTAG.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-JTAG.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-JTAG.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,58 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-JTAG
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 3 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+12 in dot l \_TRST\_
+14 in line l TDI_SHARED
+15 out line l TDO
+13 in line l TMS_SHARED
+5 clk clk l TCK
+
+
Added: usrp-hw/trunk/sym/generated/et1011c2-MDI.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-MDI.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-MDI.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,65 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-MDI
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+25 io line r TRD0_P
+26 io dot r \_TRD0_N\_
+
+28 io line r TRD1_P
+29 io dot r \_TRD1_N\_
+
+34 io line r TRD2_P
+35 io dot r \_TRD2_N\_
+
+37 io line r TRD3_P
+38 io dot r \_TRD3_N\_
+
+32 io line l RSET
+51 io line l PRES
Added: usrp-hw/trunk/sym/generated/et1011c2-MGT.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-MGT.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-MGT.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,54 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-MGT
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 5 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+55 in clk l MDC
+54 io line l MDIO
+53 out line l \_INTERRUPT\_
Added: usrp-hw/trunk/sym/generated/et1011c2-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/et1011c2-PWR.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/et1011c2-PWR.src 2008-12-27 00:55:15 UTC
(rev 10169)
@@ -0,0 +1,85 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ET1011C2-PWR
+device=ET1011C2
+refdes=U?
+footprint=MLCC84
+description=LSI TruePHY
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 7
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+45 pwr line l VDD_REG
+46 out line l CTRL_2V5
+47 out line l CTRL_1V0
+
+85 pwr line b GND_PAD
+
+4 pwr line r DVDD_IO
+52 pwr line r DVDD_IO
+58 pwr line r DVDD_IO
+64 pwr line r DVDD_IO
+71 pwr line r DVDD_IO
+76 pwr line r DVDD_IO
+
+6 pwr line r VDD_1V
+19 pwr line r VDD_1V
+48 pwr line r VDD_1V
+56 pwr line r VDD_1V
+63 pwr line r VDD_1V
+
+21 pwr line r AVDDH_2V5
+31 pwr line r AVDDH_2V5
+
+20 pwr line r AVDDL_1V
+27 pwr line r AVDDL_1V
+30 pwr line r AVDDL_1V
+33 pwr line r AVDDL_1V
+36 pwr line r AVDDL_1V
+39 pwr line r AVDDL_1V
+
+7 in line b NC
+8 in line b NC
+9 in line b NC
+10 in line b NC
+11 in line b NC
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r10169 - usrp-hw/trunk/sym/generated,
matt <=