Re: [avrdude-dev] Problem reading Lock Bits

[Vitaly V. Ch]

readed bytes is in Intel-hex format. most like lockbits value is 0x3f.
also you can change output format for avrdude

\\wbr Vitaly Chernookiy

On Sun, Sep 27, 2009 at 6:00 PM, Markus Burrer <address@hidden> wrote:
> Hi, I want to read Lockbits with avrdude, but I have a problem.
>
> If the Lockbits set to 0xFF (checked with AVR Studio) avrdude reads
> :010000003FC0
>
> Tested with AT90USB162 and ATmega88.
>
> I'm using avrdude 5.8, downloaded and compiled from svn today.
>
> Is there a Problem with avrdude or how I have to read the information?
>
> regards
> Markus
>
>
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avrdude-dev
>